Project

HDPE high efficiency 7m geomembrane extrusion Line Project

  • Type:JWS150
  • Capacity : 1000 kg/h
  • Location : China
  • Date: 2026.10
Share:

Jwell 7 M HDPE geomembrane sheet extrusion line

Project Details

HDPE 7 m Geomembrane Extrusion Line — Project Introduction

Project Overview

Item Details
Project Type JWS150 Geomembrane Extrusion Line
Product HDPE geomembrane, width up to 7 m
Capacity 1,000 kg/h
Core Technology Ø150 high-efficiency energy-saving screw
Location China
Date 2026.10

Project Background

Geomembranes are increasingly in demand for landfill lining, mining heap leach pads, water reservoirs and aquaculture containment projects. Wide-format HDPE geomembranes — especially 7 m rolls — are preferred by contractors because fewer welds mean faster installation and lower leakage risk. In 2026, a Chinese manufacturer decided to add a dedicated wide-geomembrane line to serve this growing infrastructure market and contracted us for a complete turnkey extrusion solution.

Customer Pain Points

  1. High output requirement. The customer needed a stable 1,000 kg/h line output to meet large tender volumes and tight delivery schedules. Conventional geomembrane lines in this class typically run well below this figure, forcing customers to either buy multiple lines or accept longer lead times.
  1. Limited budget. With a fixed investment plan, the customer could not simply scale up machine size or install parallel lines. They needed a single-line solution that reached 1,000 kg/h without a proportional increase in equipment cost, floor space or power consumption.

Our Solution

We delivered a JWS150 HDPE geomembrane extrusion line built around our Ø150 high-efficiency energy-saving screw:

  • High-output single screw design — the optimized barrier screw geometry increases plasticizing capacity and melt homogeneity, pushing line output to a stable 1,000 kg/h on HDPE.
  • Energy-efficient drive and heating — lower specific energy consumption per kilogram of finished geomembrane, directly cutting operating costs and protecting the customer’s limited budget over the long term.
  • Stable 7 m wide forming — coordinated die, calibration and winding systems keep sheet thickness uniform across the full 7 m width, even at maximum output.
  • Turnkey delivery — from extruder to winding, engineered, installed and commissioned as one complete production chain.

Project Result

The line achieved the customer’s target of 1,000 kg/h continuous output with a single JWS150 extruder, delivered within the planned investment. The customer can now bid for large-scale containment projects with confidence, producing 7 m HDPE geomembrane rolls at one of the highest single-line outputs in its class — while keeping energy costs per kilogram low through the high-efficiency screw design.

Project Video

Project Photos

Jwell 7 M HDPE geomembrane sheet extrusion line

Brochure

Download our document to see specific data of the service and how we work.

Get A Free Quote